671     Cannot read the device type from the media INI file
672     Cannot read the device name from the media INI file
673     Cannot read the usage from the media INI file
674     Cannot read the maximum connection BPS rate from the media INI file
675     Cannot read the maximum carrier BPS rate from the media INI file
676     The line is busy
677     A person answered instead of a modem
678     There is no answer
679     Cannot detect a carrier
680     There is no dial-tone
681     General error reported by device
682     ERROR WRITING SECTIONNAME
683     ERROR WRITING DEVICETYPE
684     ERROR WRITING DEVICENAME
685     ERROR WRITING MAXCONNECTBPS
686     ERROR WRITING MAXCARRIERBPS
687     ERROR WRITING USAGE
688     ERROR WRITING DEFAULTOFF
689     ERROR READING DEFAULTOFF
690     ERROR EMPTY INI FILE

691     Access denied because the username and/or password is invalid on the domain
692     Hardware failure in port of attached device
693     ERROR NOT BINARY MACRO
694     ERROR DCB NOT FOUND
695     ERROR STATE MACHINES NOT STARTED
696     ERROR STATE MACHINES ALREADY STARTED
697     ERROR PARTIAL RESPONSES LOOPING
698     A response key-name in the device INF file is not in the expected
699     The device response caused buffer overflow

700     The expanded command in the device INI file is too long
701     The device moved to a BPS rate not supported by the COM driver
702     Device response received when none was expected
703     ERROR INTERACTIVE MODE
704     ERROR BAD CALLBAK NUMBER
705     ERROR INVALID AUTH STATE
706     ERROR WRITIING INITBPS
707     X.25 diagnostic information
708     The account has expired
709     Error changing password on domain
710     Serial overrun errors were detected while communicating with your modem
711     RasMan initialization failure. Check the event logs
712     Biplex port is initializing. Wait a few seconds and redial
713     No active ISDN lines are available
714     Not enough ISDN channels are available to make the call
715     Too many errors occurred because of poor phone line quality
716     The Dial Up Networking/Remote Access IP configuration is unusable
717     No IP addresses are available in the static pool of remote access IP addresses
718     PPP Timeout
719     PPP terminated by remote machine
720     No PPP control protocols configured
721     Remote PPP peer is not responding
722     The PPP packet is invalid
723     The phone number, including prefix and suffix, is too long
724     The IPX protocol cannot dial out on the port because the computer is an IPX router
725     The IPX protocol cannot dial out on the port because the IPX router is not installed
726     The IPX protocol cannot be used for dial out on more than one port at a time
727     Cannot access TCPCFG.DLL
728     Cannot find an IP adapter bound to Dial Up Networking/Remote Access
729     SLIP cannot be used unless the IP protocol is installed
730     Computer registration is not complete
731     The protocol is not configured
732     The PPP negotiation is not converging
733     The PPP control protocol for this network protocol is not available on the server
734     The PPP link control protocol terminated
735     The requested address was rejected by the server
736     The remote computer terminated the control protocol
737     Loop-back detected
738     The server did not assign an address
739     The remote server cannot use the Windows NT encrypted password
740     The TAPI devices configured for Remote Access failed to initialize or are not installed correctly
741     The local computer does not support encryption
742     The remote server does not support encryption
743     The remote server requites encryption
744     Cannot use the IPX net number assigned by the remote server. Check the event log. 
752     A syntax error was encountered while processing a script